Multisensor
This page contains pre-release information.
Further information will be provided in the next few days.
Release 1.0.0 date: May 17, 2022
Available Options
| Part Number | Connectivity |
|---|---|
| DK-ST15 | WiFi only |
| DK-ST15-LRW | WiFi + LoraWan |
| DK-ST15-NB | WiFi + CAT-M NB-IoT |
| DK-ST15-ZB | WiFi + Zigbee |
The DK-ST15 can be updated to any connectivity option. The optional connectivity Modules can be upgraded at any time. Follow follow the module installation instructions.
Safety information
Read these instructions carefully and look at the equipment to become familiar with the device before trying to install, operate, service or maintain it. The following special messages may appear throughout this bulletin or on the equipment to warn of potential hazards or to call attention to information that clarifies or simplifies a procedure.
Overview
The Dakton Multisensor ST15 is a versatile solution that’s intended to be used in different types of IoT environments.
Some of the common applications:
- Home Automation.
- Burglar Alarm.
- Site Monitoring.
- Industrial Automation.
- Automotive Monitoring.
Device Features
- Wifi 2.4GHz.
- Ethernet 10/100.
- Web Interface.
- 15 input zones (dry contacts) software upgradable to 30.
- MODBUS RS485 support.
- 2x Shunt Reading Inputs (16bit resolution).
- 1x Digital Output.
- Temperature Bus (up to 120 Sensors).
- 2x Voltage input Measurement (up to 60VDC) or *4-20mA inputs.
- Build-in RTC.
- USB type C.
- Build-in Sound emitter.
- * Gyroscope & Compass.
- Low power consumption.
- * External antenna.
- * Lora/LoraWan.
- * Zigbee.
- * Cat-M NB-IoT.
(*) Optional
Specifications
| Parameter | Specification |
|---|---|
| Operating Voltage | 9-48VDC |
| Antenna Type | Build-in or *External |
| Operating Humidity | ＜90%RH |
| Operating Temperature | -20°C ～ 55°C |
| Storage Temperature | -10°C ～ 70°C |
| Max. Ouput Current | 120mA at 12V |
| Configuration | PC (with cable) or Mobile (with Conf adapter) |
Pinout
Installation instructions
Configuration & Upgrade Inteface
Upgrade with Firmware file
PC software WonkaTool:
For upgrade via Firmware file you will need the PC software WonkaTool
Web interface
The Web interface is reachable by default as Dakton_SERIALNUMBER Wifi hotspot. This Web can be used with desktop or cellular browsers.
| Wifi Hotspot credentials: | |
|---|---|
| HotSpot | Dakton_SERIALNUMBER |
| Password | dakton1234 |
After the hotspot is connected you can access to the Web inteface with your browser at:
| Defaults | |
|---|---|
| Web address | http://192.168.4.1 |
| Username | admin |
| Password | admin |
